Principles of Nuclear Spin design for magnetic devices
The Australian IIC
Picture showing the original OZ IIC device created by David G Dawson of Australia and participant of c_s_s_p group.
Bismuth and magnets are laying in front, and various AG metal tubes all
slide into one another, with experimental coils at each end.
The experiment was aimed at passing magnetic energy waveforms and
pulses through the AG and magnetic metals and observing the effects.
The results have been rather amazing and produced effects that were
totally unexpected. I consider this device one of the greatest
breakthroughs to comprehension of the AG metals and their
potential use. The metals Bismuth, Copper, Aluminum and Iron are all
present and available for study in the device.
Davids print showing magnet alignments and bismuth core. Iron rods are
used to center the core components and extend the field to the edges of
the device.
The tubes were discovered to create alternate nuclear spin fields that radiate up to 100
feet away from the device from combining only the AG
metals, magnetic metals, and long strings of neo magnets. They have
shown how alternate nuclear spin fields propagate as well as how they
can be produced coherently.
The tube device does not need the scalar canceling coils to create
large alternate nuclear spin fields however this was the model used to
create the second device. The original device used a large Lakhovsky
coil on one end producing an almost overwhelming effect which was too
intense for me on the duplication so I altered the design. Bismuth is a
lineup of pellets 1/2" diameter stacked to 10". Neo magnets of 1/2"
diameter fill the rest of the inner copper tube to form two large dual
opposing spin fields through the AG metals. The original device used
far less magnets and David had intuited 10" on both sides of the
Bismuth.
Pictured is the duplication by David Lowrance of c_s_s_p group using only Copper Iron and neos.
Tubes are centered with layers of electrical tape or plastic wraps and can be easily slid out.
The device is powered only from the magnets and all observed effects originate within the magnetic spin!
Experiments were preformed over several months and are still ongoing.
Tube Device Duplication
Principles
The following are an intuitive model to aid development and subject to
change with experimental evidence. They reflect the observed effects of
this device thus far and the interaction noted between the AG metals,
iron, and neo magnets. There were other effects noted having to do with
the barometer and weather patterns which David was monitoring closely
as well, but results are inconclusive at present. The device is
observed to be quite powerful at demonstrating what a nuclear spin
field is and how it interacts between the AG and magnetic metals.
Spin:
Spin is radiated as a function of inverse linear
distance and
reaches much further then the magnetic or electric fields. Spin is
source of all time [tempic] effects as well as relative time flow rate.
Time is the field necessary for all other fields to operate within and
thus is viewed as the primary field [Wilbert Smith]. Secondary field is
Electric and the third field is Magnetism.
In a device that alters nuclear spin, the effects from altered spin
radiate out much further then the magnetic fields creating them. The
Electron spin of magnets has little effect because of its' low mass.
The two atomic
motions that most effect time flow rate are the Neutron and Proton
spin. They sit at about 90 degrees and are the main cause of all
torsional effects from motion. Proton is magnetic and Neutron is
diamagnetic. The two spinning masses at 90 degrees create inertial
effects in all vectors of motion. Torsion is the result of pushing a
spinning wheel at 90 degrees to it's spin plane along it's axis. It is
normally not possible to push an atom without creating motion along the
axis of at least one of its two spinning masses. The spin of each is
forced into quadrature rotation by the magnetic and diamagnetic forces
normal interaction.
Principle of spin coherence:
If two fields overlap over half their field in alignment they become
one field that is larger and 4 times stronger as to spin. This
principle is shown in the crystal ball experiments with dual monopole dodecahedron
magnet wrap set up for inflow. It is also shown in the 4' tube device where large
opposing fields can project perceptible altered spin to 100 feet or more, well beyond the magnetic fields. A period
of time is noted where spin alignment slowly comes into synchronization
between many atoms and field coherence increases the time fields
effects over distance.
Principle of scalar opposition:
Where two magnetic fields cancel along an opposing face, is created a
time sheer effect where spin is predominantly different on both sides
of
the sheer face. Each side is effecting spin oppositely so a time
gradient becomes present between them. At the point where all magnetic
fields cancel the diamagnetic field from the Neutron is released from
it's normal 90 degree position and the Neutrons spinning mass may tilt
into a plane of device motional spin if present.
Principle of diamagnetic fields and mind:
The Neutron spin is aligned with its diamagnetic field as it sits
spinning at about 90 degrees to the Proton and Electron magnetic fields,
opposing both ends of both fields, all are in precession. The diamagnetic field is effected by mental function, and in the
RainMaker and orb devices it is shown to be possible to manipulate the
spin angle mentally.
It is shown that the RainMaker ferrite ring although tilted is not
aligned properly to create a large alternate spin field on it's own.
Setting the
magnets at a perfect 42.5 degree angle will produce a large
alternate spin field. Mind is able to make this manipulation and expand
the field as though it were aligned. It is the diamagnetic field
centered with Neutron spin alignment that we are able to manipulate
using mind. We call this force Chi in the meditative arts and is a
force related to diamagnetism and scalar energy. This is also
identified as the mysterious 90 degree field of scalar coil alignment
in the Sweet VTA.
The angle was measured using the tube device and 4' tubes of Aluminum
and Copper crossing it separated by 1 to 2", where it was discovered the heat energy would
immediately flow to the ends of the tubes anywhere near this crossing
angle. The tube device produces such a strong field that these angles are easily sensed and verified.
Principle of atomic spin balance:
In the magnetic materials atomic spin aligns in dual opposing spin
frames. Between atoms, magnetic polarities flip, and spin opposite
directions. In a magnetic field Proton and Electron particles spin
opposite
direction. In the Neutron also dual spin is present at the heart of the
diamagnetic field. NMR teaches us the nuclear spin is around 50% in
each spin direction across matter at room temperature setting in a
magnetic field. Matter can be
modeled as two massive wheels spinning opposite directions,
with diamagnetic wheels inside spinning oppositely at about 90
degrees to them. A magnet
creates an imbalance in the dual opposing nature of spin aligning more
spin one direction. Because a
magnet is generating its' field from the Electron shell the spin of
mass is not effected to any great extent. It is only when we introduce
the magnets field to the AG materials that we get a notable predominant
alternate spin field causing a time flow differential because now we
are spinning Proton mass more in one direction. As soon as one places a
long string of magnets inside a copper tube the effect is realized,
unbalancing the spin of nuclear mass.
Time flow rate sheer fields:
The tube device is just strong enough to verify these effects are very
real and this is one reason why this device is so important as a tool
for study. We can observe these fields in operation at a relatively
safe level and understand why spherical devices are necessary for
devices powerful enough for density shifting.
In the tube device we see the effects of a perceptible time flow rate
sheer field. It is disruptive to human functions
causing confusion and
ill effects, pain, headaches etc. This is where scalar fields may
become dangerous at higher levels. If a strong enough time flow
sheer is created it can be destructive even to matter cohesion and
matter will fly apart [Wilbert Smith].
This principle must be understood to work with time altering devices
safely. Just like the Electromagnetic field can shock and even kill
someone a time sheer can destroy the bodies coherence. The most basic
field we have is spin, the linear distance effect. It's reach is
greatest and it's speed sets the time flow rate. To manipulate it we
use the shortest range force, magnetism, a distance cubed force. Never stand or sleep in the sheer field of a linearnuclear
spin device. This is setting at 90 degrees to its' predominant
magnetic spin fields and falls off as an inverse linear distance force
[the tube device]. The sheer field is felt as pressure or stress that
seems to grow in intensity over time of exposure. It is different from
inflow or outflow as perceived in the RainMaker device. It is
recommended to position the tube experiments so time is
spent off the ends of the device to avoid these stresses for long
duration experiments.
Spheres and Platonic forms:
The sphere is the only safe form to produce a strong time sheer field
within. Crossing through an activated sphere would be destructive just
as touching a Tesla coil that was energized while standing on the
ground in water. The inside and outside may safely contain different
time flow rates coherently because the time sheer face is spherical.
One alternate time flow rate is contained inside the other and this
models the atom. The cylinder has also been shown to appear as a
relatively safe form, turning one spin gradient inwards and the other
outwards so that time sheers are kept contained in a ring.
The AG metals:
Copper, Aluminum, Bismuth
These metals are able to propagate the two fields of spin effecting the
time flow rate the greatest. These are the Protons magnetic field and
the Neutrons diamagnetic field. Both spins normally sit at 90 degrees
however the diamagnetic field can be freed with scalar fields, manipulated with mind or device spin, and the
Magnetic field with external magnets. Aligning an AG metal at about 40
to 47 degrees with a strong magnetic field will allow the propagation
of both fields through the materials. Alignment of the two fields that
most effect time flow rate is possible in these metals because both
fields are present and both fields may become coherent through the
materials. They can be used to create a coherent time flow rate within
a sphere or platonic form that is safe to sit within or without.
The magnetic metals:
Iron, Cobalt, Nickel
These metals can be magnetized such that dual spin is thrown off
balance to surrounding matter at the Electron layer. This creates a predominant spin
direction and a slightly altered time frame as well as a strong magnetic field
. The Electrons mass is so small, 1000 times less then nuclear mass,
the altered time frame is not noticeable or perceptible as an altered spin field. The magnetic metals can be
used to align Proton magnetic fields in the AG metals to achieve spin
coherence effecting time flow rate. The tube device shows us
the effects for combining these materials and creating alternate
coherent nuclear spin fields.
Nuclear coupling:
Manipulating the two nuclear fields becomes possible using scalar
canceling magnetic fields. The two nuclear fields set at 90
degrees because the diamagnetic field is repelled from both ends of the
magnetic field. Since the diamagnetic field is two overlapping magnetic
fields it may be released from its' normal alignment with a scalar
canceling field. At
the intersection of two powerful opposing magnetic fields, the
diamagnetic field may turn freely to form a coherent field with the Protons
field and achieve spin alignment in a spinning device. It may also be
possible to do this alignment with mind alone once the field is freed
in a stationary device? This remains to be demonstrated.
We can expect two very important
results. First inertia will no longer work the same, and secondly mind
may be able to effect the coherent magnetic/ diamagnetic field that
results. The
inertial motion of the device would be totally reduced as to motion along
its' spin plane. The spin of all nuclear mass may fall into one or two
alignments that allows for torsion less motion or torsion less rotation.
Since these two fields are both propagated through the AG metals, we
can now use them to extend the field to the outer hull of a ship and
contain an alternate time frame coherently inside the entire area from
point of generation outwards. The time sheer will be created in the
magnetic device but extended outwards from the point of nuclear
coupling to the edges of the AG material. This phenomenon is observed
in the RainMaker as a copper coil is placed around it. The hot field
extends evenly out to it even over the ferrite ring setting now inside
it. The field normally found inside the ferrite ring is extended to the other surface of the copper.
The dodecahedron provides angles of nearly 40 degrees to a coupling
tube from center to one of its' vertex points and would seem to offer
the best coupling for such a field to propagate to the outer hull of a
ship from a central magnetic nuclear spin altering device.
The fields are all now mapped to create a density shifting device.
Two devices are now speculated as workable from the principles observed.
- A ship or enclosed craft where coherent alternate time fields can be experimented with in relative safety.
- A probe that can be linked to mentally, from outside, using a bismuth scalar weave coil.
Both would be designed with a platonic or spherical magnetic device to alter nuclear spin.
If mental linking is possible to the pineal gland, perception may be
expected to flow into the AG material of the hull and possibly turn to
perceive outwards of the entire shell of the device. It is unknown what
"perceptions" would be possible through this connection.
Credits:
The tube device 'OZIIC' was conceptualized and created by David G Dawson all rights reserved and all recognician given to him.
I personally thank him for sharing this concept and freely sharing the
information of resulting experiments, as well as all the others at
c_s_s_p who have been working on the comprehension of the tube device
platform and the wealth of possible experiments resulting from the
concept.
The previous presentation is public domain and may be replicated and shared for informational purposes and non commercial use only.
It may not be published in book form or sold comercially.
c_s_s_p group 10 - 8 - 6
Home