Interactive Lessons in Vibration Sensing

In mass vibration work, there are many ways to couple energy between various fields, and cause a self sustaining effect that will begin to power itself.



This one is a most powerful experiment, that will make a field which can be felt at 50 or more feet away.

Machines

In previous lessons we were aimed as starting with the Source, the Field Fabric for a reason.
That understanding is essential as the foundation on which all other structures operate on top of.

It is everywhere, both inside everything, and outside everything, we can access the 333000 hz vibration system both to draw energy from 333 khz but also to rout it back into 37 khz to terminate it as a circuit would terminate.  333000 / 9 = 37000.

Source Field

So it is necessary to realize what ever form of matter we are working with, both inside it and outside it is the foundation present to sustain it. This is the Field Fabric of all space.

We can do geometric expansions with the base frequency and move right up the spectrum.
Here is an example of a 4x area expansion of one octave.
333000 hz x 4 =  1,332,000 hz

This just happens to be the source frequency used for the QEG! No surprise there.
A two dimensional expansion should support an electric field, and that is what the QEG is all about.

So in summary the Source field can be accessed at a great many levels of frequency, and there is no way I can personally know where it tops out at present, but it does top out at the frequency of the strobe of the universe. The highest frequency that anything can move or change position. The diameter of the universe itself, which we later discover the Proton is a smaller fractal of.

Now it is time to enter a different thought process that may not become very obvious until we start doing it. That of experimenting with random vibration frequencies, such that we locate two which will become able to exchange energy in a way such that they begin to power one another.

The first and most important of these Ratios is the Pi / 2 ratio, which also has an emotional character of being recognized as "life force" by beings that are also alive.

However it is also a ratio that appears in the realm of Electronics, and operates between the A field and the EM fields.

Because they were not able to make a meter to show the presence of the A field, it was dropped from the teachings. However it was integral to understand when the formulas were created as the Pi / 2 is still present in the formulas. As a sensitive we can learn to feel and detect this field.

Pi / 2 is the relationship between the path around a circle to the opposite side, and the path directly through the circle to the opposite side. Giving us a clue in the difference between the path of electrons on an atom, and the path of mass vibration passing directly straight through the atom.

We all know the atom is so stable, it will always recover from whatever we do to it, short of a nuke ..... ok there's that.

So how can we begin to use this ratio in our vibration work to create fields of vibration energy, and field bubbles of energy, that may be recognized as increasing our personal life force?

We first go back to Lesson 1   mm = khz  and we are now ready to start designing elements and setting up fields on them. And after we learn from these devices how it feels, we may discover we can tune these things by sliding our own frequency around, and start to dance with others in a very positive way.

We can measure the diameter of a copper pipe and then cut it off at that length times Pi / 2 and get a preview of how this sets up a field.

Pi / 2 =  1.5707963267948966192313216916398...

And since this is an irrational number, if we do a good job of feeling this cut, it will start a dance all the way down to atomic dimensions. If we miss a little it will still operate at larger dimension just fine.

Learning to score a copper pipe at a specific point that is an irrational number, is a talent we can master if we have this sensitivity. However it is lucky for us, the resonance will actually start to be noticed on both side of the perfect cut, it will peak in intensity at the perfect cut.



Here I have located nodes along the 44.25 length iron rod, at various frequencies, showing how even the touch of a wire at the right location can bring up a vibration field. This is far more pronounced in Copper medium using the edge of a sheet rock knife.

Now if we are going to be vibrating two things against a ratio of the mass and the energy comes from it's mass, we then have to first measure the center of the mass, and not from the outer or inner edges of the pipes mass.

In practice, we measure the outer dimensions of the pipe, and then subtract the thickness of the pipes walls one time, this results in a diameter that lands 1/2 way inside the pipe all the way around. This is the number we use to access it's mass vibration dimension, center of mass.

Technique is the same as making a Ra tube, but now the power is coming from a different source, the mass of the pipe. A sheet rock knife can be used to slide down the pipe until one feels the peak of the energy, and a score is then placed on the mark location making a shinny indention for the cutter wheel to start the cut.

Pi / 2 is only the very beginning of this kind of energy extraction.
Everyone should make something in some form to experience the Pi / 2 relationship at some point, because then it will always be recognized by the body intuitively after that.

Other important ratios are also worth the time to explore as they can do many different things.

Phi ratio is most dangerous, if we hit on it accurately with our sensing ability, it is what pulls us to the earth incessantly, and it can also make devices we want to run away from.

I experimented with phi to the point that timbers in my house started to flex and creak loudly over time as it builds up a force very slowly that never stops building.

There are literally 100's of examples of experiments on the site of using pi/2 ratios, and the most dramatic may be the ones with Joe Cells [VC = Vibration Cell] and Moe Joe Cells. Both these use the ratio to generate "active life force" feeling cells that feel very nice to experience.

Machines

Relationships

VC-Pi

The Geometric Path to Accurate Telepathy

Our conscious field recognizes these because it is an integral relationship of nature from the level of the atom. The first fundamental form of matter that is stable in our universe.

The next layer of the atom upwards is the Electron To Proton Electric field gap distance and the frequency ratio between them that is always present at the level of EM vibration.



Here we are now moving into the other two field forces which can be read on EM test gear, and science has now offered us a ratio we would never have discovered working alone with only our sensitivity skills.

And yet when we access this ratio, it is most dramatic to experience.

E/P Ratio

If by now you have the digital frequency generator that is accurate enough, and a scalar coil, this experiment is one very much worth performing if only for the deep experience of remembering this basic level of creation. It opens a door also to free energy devices where it was found to be present in at least two of them, and very likely more that we cannot see the coils or count the turns inside.

At this point we are now working our way completely through the atom, and reaching a point of energy extraction on a level of powering systems.
The kind of energy however is still unknown to our public sciences, and while it may be considered fringe science, the bottom line is that it works.

The mathematics that hand us these ratios, has been done in NMR science.
This is beyond the entry level of this lesson, but it should be remembered that when you have mastered abilities to map the shape of a field you bring up from the Field Fabric, or create, this is the next step.

Without that ability to fully feel and map a field you created, this line of investigation would be dangerous to embark on. It is for a person who can already feel and sense very accurately, and not succumb to fear and running away when power actually starts to come up from the Field Fabric we live inside, and we are responsible to control it and shut it back down if necessary.

This is the sections of the site dedicated to Conical Fields.

Read it if you like, cipher the equations, but do not attempt manifesting these forms until you are ready to control them, with your feel felt senses to detect exactly where they are, and what shape they have.

Build the platform 2b first and experiment with spheres on it, until you get complete accuracy.
Never but never bring up a 30 degree conical system, convert it to 33 degrees.

Conical Field Menu